High pressure cooling dedusting micro water atomizing spray nozzle
High-pressure spray electroplating anti-corrosion, the nozzle is made of brass material, the surface is plated with silver nickel layer, the nozzle is made of durable ceramic sheet, the service life is long, the nozzle is designed with anti-clogging filter plug and anti-drip rubber plug, the defect rate of the nozzle is tested by passing water Less than one ten-thousandth, well-made
How to use: Once the nozzle is blocked, it can be removed. Facing the hole of the nozzle, blow it down with an air gun from the inside or blow it hard with the outside of the mouth, and shine it on the light. Don't drop the small accessories inside, the nozzle can be used repeatedly.
scope of application
(1) Landscape fogging: used in parks, pools, and rockery to attract people
(2) Farm disinfection: used for livestock and greenhouse breeding
(3) Dust removal and cooling in the workshop: used for dust removal on roads and enclosures to build a beautiful urban environment
(4) Humidification in greenhouses: used for cooling and humidification in greenhouses and greenhouses
The liquid flows at high speed under 20KG-70KG water pressure, forming a centrifugal vortex in the guide vane, and spraying fine hollow mist particles from the nozzle hole. The nozzle hole of the Teflon filter is made by a high-precision punching machine in the United States, and the aperture is well-made between 0.1MM-0.6MM.
|High pressure atomizing nozzle
|Brass with nickel plated body,stainless steel orifice
|3/16", 10/24", 12/24"
|0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm
|Around 20 microns